AAT Discussion Board

When you purchase lawn mower blades, it is important to choose the best quality. This will make sure that the blade lasts and will also help the mower to run more efficiently.

Stainless steel is the most suitable material for blades since it's robust. They are also resistant to rust and look stunning on the lawn.

Straight Blades

 

 

If you're a homeowner using an ordinary lawn mower, the initial blades it came with will probably be straight. These blades are ideal to bag and side discharge but not mulching because they don't provide much lift. If you want to use one that does both, consider buying the high-lift blade. They feature a curved edge which helps to lift the clippings. These blades work better with thick or tall inspiring grass mower blades sharpener.

The blade's side facing upwards has small ridges, or wings that create an air vacuum that lift the grass and make a precise cut. This type of blade also works well on both dry and damp surfaces, but is better at cutting through thicker grass than standard lawn mower blades.

High-Lift Blades

 

 

It is easy to identify them by their distinctive upward curve on either end High-lift blades generate strong airflow that pushes clippings into the bag or side chute. These blades provide an improved cut and are able to avoid clumping of tall grass.

This is due to the fact that the blades generate more suction and airflow. If you live in a sandy soil, the dirt they release will swiftly ruin your lawnmowers and cause premature wear.

The blades differ from other replacement blades because you do not need to remove the mower deck. You can access the bolts that hold the blade by raising the mower deck. If you replace the mower's blade, be cautious when dealing with sharp edges. Replace the blade following removal of the previous one. Check it out for the right fit. You're now at the point of returning to work.

Multi-Purpose Blades

 

 

They are multi-functional and can be employed to bag, cut and let your grass clippings go side-by-side. They generate a lot of suction and airflow and help chop the grass into small pieces which can be easily placed in the soil to be used for nutrients.

However, this type of blade for lawn mowers isn't suitable for mowing sandy terrains. The airflow can draw dirt and sand into the blade. This may cause the blade to wear out faster.

Check the blades original to them that were included with the pusher or tractor. Look for specifics like the length of blades, as well as the diameter of the center hole. Compare them to the specifications of the blades that you would like to buy. It is then possible to be certain that your new blades will be a good fit for the mower. Take note of the blade's thickness. Thicker blades are usually linked to longer lasting, although this depends on how frequently you use your mower as well as how thick the material is.

Mulching Blades

 

 

A mower blade that has a dramatic upward turn at the back edge is great for lawns where clippings need to be mulched. They provide more lift, allowing the grass towards the deck and through the discharge chute. These blades also help in the cutting of grasses with thicker blades. They may require more power from your engine and could result in additional fuel.

A high-lift blade is equipped with an extended "wind wing" on the back side to boost the flow of air. This helps reduce dust and suction. These blades are perfect for riding mowers, and provide a more uniform and smooth cut.

For the installation of a mulching blade, first ensure that it is compatible with the specifications of the mower. Then, put a wood block between the blade and its mounting bracket to keep it from twisting while you tighten the nut. Then, you can put it on the blade with a ratchet and the washers included in the kit.