AAT Discussion Board

Mower blades are a vital mower, but using the wrong kind can cause damage to your mower or pose a health risk. This guide will assist you in finding the right blades to use on your lawn.

Standard blades are designed to cut grass quickly and then send it for the bagging process. They also can mulch effectively.

They cut grass

 

 

Regular blades are simple to use and can cut grass into tiny fragments. These pieces allow the grass to be reintroduced to the soil, where they can fertilize it. They are less likely to accumulate dust than other types.

A blade that has a low lift is ideal for sandy land because it demands the least amount of energy to function. This type of blade doesn't produce a large amount of dust to be blown in the air and can last longer than other types of blades.

They are more suction-driven than the other blades. They can break down the grass clippings to smaller pieces that can then be bagged or discharged. These blades are great for lawn services that have customers who have different requests regarding handling the grass clippings. The range of these blades is a plus but they're not as durable as carbide or steel blades. They could require more care including cleaning, balancing and sharpening.

It Mulch

 

 

A lawn mower's blade produces a strong suction over the land, pulling up grass to be cut precisely. This suction may also circulate dust and suck up in the blade's deck, causing rapid wear.

A high-lift blade however is able to suck up grass and propels it forward, allowing for easy disposal into the bag or side discharge chute. The blades are usually curved and have additional cutting surfaces along the edges to help in mulching.

The most effective results can be achieved when you select the correct blade for your lawnmowers. To ensure you're buying the right type of blade, look it over for the part number or code that is compatible with the parts list of your unit found in the user's manual. Make sure that the center hole pattern of the new blade is lined up with the one that came with your unit. If you're sure that the blade is fitted correctly, attach it using the washer and nut that came with it.

They Lift Grass

 

 

The larger edges of the high lift blades collect a small amount of air while the mower is moving. This creates a cushion of air that reduces friction when cutting, which results in better cuts. It also sucks up clippings and propels them forward to the side discharge chute or grass bag for easy removal.

They are ideal for cutting grasses that tend to clump. They work well on wet or dry lawns but may not be as efficient if you are mowing over areas that are sandy or dusty because they are prone to catch and scatter dirt and stones up into the air.

Make sure you take the proper safety precautions when you change the lawn mower's blade. To remove the blade you'll need to place discover the secret to a well-groomed lawn with our mower blade sharpener mower on a level surface and remove the key. The bolts that hold the blade in position are able to be removed and a new blade put in.

They discharge grass

 

 

The wide edges of high-lift blades form an air pocket between the grass and them as they move through the lawn, reducing friction and resistance. This creates a powerful suction that lifts the clippings and propels them into the side discharge chute or grass bag for simple disposal.

Low-lift blades are better suited to sandy soils, since they're not able to generate enough suction that would lift grass. They're also more prone to damage caused by stones and other debris that get into the mower during cutting.

All-purpose or 2-in-1 standard blades are commonly found on lawn mowers that are regular and those fitted with rear bagging attachments. They have some slight curvature on the edge which reduces the clumping and also helps better distribute grass clippings over your lawn. However, they are only able to provide moderate air circulation, which could create a strain on your engine and reduce your control over clipping distribution.